Grey whales feed on the seafloor because dense patches of small invertebrates can live in or on the sediment. A grey whale can roll onto one side, use suction to take in sediment and water, and filter edible animals through baleen. Amphipods, small crustaceans that can occur in dense beds, are important prey in some habitats. A feeding whale may leave a shallow pit on the bottom and bring a plume of suspended sediment to the surface. Researchers have studied those traces off Vancouver Island and on northern feeding grounds. COSEWIC grey whale assessment, feeding behaviour Sonar research on grey whale feeding grounds off Vancouver Island
If a whale surfaces beside discoloured water, the plume might be the most visible part of a feeding event. Look at where it appears relative to the whale and what the animal does on the next dive. Mud in a bay can come from many sources. A close relationship between repeated dives, the animal’s surfacings and the new plumes makes the feeding interpretation more plausible.
How suction and baleen work together
A grey whale has baleen plates hanging from the upper jaw. It can take a mixture of water, sediment and small animals into its mouth, then force the water out through the baleen. The baleen retains some of the prey. Suction helps move material from the bottom into the mouth in the first place. The whale’s tongue contributes to changes in pressure and the movement of water as it takes in and filters a mouthful. US Geological Survey report on grey whale feeding grounds and feeding pits
The side roll places the mouth close to the surface where prey are concentrated. If prey live in the upper layer of sediment or build tubes there, the whale can reach them by disturbing a shallow patch. It does not need to ingest an entire stretch of bottom. It can take repeated mouthfuls from places where the prey and bottom conditions make the effort worthwhile. The pits that researchers map are traces of those excavations. US Geological Survey study of whale feeding excavations in the Bering Sea
From a boat or shore, the roll may happen out of sight. The whale may surface with a low profile after it has already finished the movement. A visible plume can connect the surfacing to disturbed sediment. The exact position of the whale’s mouth and the kind of prey it retained generally require underwater observation or samples. A surface watcher can record the plume and sequence without claiming to have seen the entire feeding action.
Why the bottom can hold so much food
Small crustaceans called amphipods can live in dense groups in suitable sediments. Some build tubes that project at or near the bottom. A patch with many animals close together can provide food over a relatively small area. What looks like bare sand from above can hold a community beneath or at its surface. Researchers working in the Bering Sea have studied the distribution of amphipods, the type of sediment and the shallow pits left by whales. Nerini and Oliver, study of grey whales and the Bering Sea benthos Johnson and Nelson, side-scan sonar study
Bottom type matters because it helps determine what can live there and how easily a whale can reach it. A sandy area with abundant prey can offer a different opportunity from a hard surface or a patch with few prey animals. Depth matters too. A whale has to reach the bottom and return to the surface to breathe. In shallow feeding areas it can make repeated dives to a patch that a shore observer may see only as a few dark surfacings.
A feeding area can change through time. Prey abundance and distribution can shift, and sediment can move with the current. A pit left during one visit may become less distinct as sediment fills it. A map of feeding traces gives evidence about use in the conditions and period that produced them. A new map may look different even when the same whales are using the general region. The sampling date and habitat information help interpret those changes.
What sonar research found near Vancouver Island
Researchers have used side-scan sonar to study grey whale feeding grounds off Vancouver Island. The equipment records patterns of sound reflected by the seabed. It can help reveal shallow depressions that would be invisible from a boat. In the Vancouver Island study, researchers examined feeding excavations and sediment characteristics. Their work provided evidence that feeding affected the surface of the seabed and helped describe how whales used the area.
A sonar mark becomes more useful when it agrees with other evidence. If surveys find shallow pits where feeding whales and their prey also occur, the observations support one another. Sediment samples can help identify the prey and substrate involved. Direct observation of a whale bringing up sediment adds a view of the event from above. Each method gives researchers a different way to connect an animal with its feeding ground. US Geological Survey side-scan sonar assessment of grey whale feeding
Think about the difference between a fresh pit and an older one. A fresh mark can show that the bottom was recently disturbed, while a partially filled depression may be harder to interpret or date. A map with many marks could reflect repeated activity during a period of good preservation. A smaller number could reflect less feeding, poorer preservation or differences in the area sampled. Scientists use the appearance of the marks and the other evidence collected to interpret that record.
What a plume looks like from the surface
A plume can show as cloudy or brownish water near the whale as it surfaces. Water movement can spread or carry the suspended material away. If the whale surfaces repeatedly in one area and new discolouration appears with it, you have a stronger observation than a single pale patch drifting nearby. Watch whether the cloud forms beside the whale, trails it or was already in the water before the animal appeared.
Wave action can stir sediment on a shallow shore. River outflow can produce discoloured water, and changing light can alter the appearance of the surface. An observer seeing the whale from across a bay may be unable to tell whether it surfaced in a cloud or just behind it. A wide photograph can help preserve the positions. If you see only one event, describe both the whale and the patch and keep any connection tentative.
Birds sometimes take prey made available by feeding whales. Researchers have observed seabirds feeding around grey whale mud plumes on Arctic feeding grounds. A flock above a plume gives you another behaviour to note. It does not establish which animal or process produced the sediment without a view of what happened first. Record when the birds arrived and whether they picked at the water or simply flew through.
Grey whales can use prey above the bottom too
Grey whales also feed on prey in the water column or near the surface. A field study off California described whales using both sediment suction and side-swimming associated with different prey habitats. The same species can therefore show a roll or a feeding movement without producing a mud plume. Where and how a whale feeds depend on the local prey. Bottom feeding is a characteristic part of grey whale ecology and one of several tactics available to the animal. Webber and colleagues, grey whale foraging observations in California
A visitor can make sense of that by distinguishing depth from behaviour. A whale in a shallow bay might be feeding at the bottom, feeding higher in the water or travelling. A clear sediment plume gives support to the first possibility. A repeated mouth movement or visible prey near the surface could support another. The better the view of where the prey and whale were in relation to each other, the better you can describe the tactic.
What the disturbance does to the bottom
Removing a patch of sediment can affect the animals left in and around it. In the Bering Sea, researchers sampled feeding pits and found lower abundance of a dominant amphipod prey within the sampled excavations. They also examined how the composition of animals in pits related to pit size and estimated age. That work studies an ecological effect of feeding after the whale has left. An observer at the surface can see a plume for a short time, while the altered patch on the bottom can remain long enough for scientists to study.
The Vancouver Island sonar study also reported differences between sediment in feeding excavations and sediment outside them. The authors considered how removing and resuspending finer material might affect the habitat of prey. That question is narrower than whether whale feeding benefits the whole seabed. The immediate effect in one pit can be removal of prey and sediment. Over time, the same disturbance can change which material settles back and what organisms occupy the patch.
A good way to compare these results is to follow the sediment in two directions. Some material remains suspended and can be carried away from the site. The pit left behind has its own physical conditions and can gradually fill. Scientists can sample the pit and the surrounding bottom, then compare those results with the water and currents. From shore you can see only the surface end of that sequence, and even the visible cloud may move before the whale comes up again.
Compare a travelling whale with a whale working one patch
A travelling whale may surface at intervals along a steady direction, leaving its previous position behind. A whale feeding on the bottom can return to the same general patch for several dives. That movement can help guide your attention, but the surface track may look irregular for other reasons. A whale could turn around a point or disappear into rough water. Use landmarks to record the positions and say whether a new plume appeared during each surfacing.
If you only see one pass, describe the water and the part of the animal you could identify. A clear photograph showing both the plume and the whale’s position can help another observer see why you considered bottom feeding. It remains a surface record of a movement that began below. The time and location can help someone compare it with other feeding observations from the same stretch of coast.
How to watch around coastal British Columbia
From a public viewpoint, choose a fixed landmark and watch the water where the whale has been surfacing. Notice whether it holds to one area or moves steadily along the coast. If a plume appears, record where and when it formed and whether you saw the same pattern more than once. Follow current marine mammal viewing guidance, and leave vessel handling to the crew if you’re on a boat. Eagle Eye Adventures’ guide to marine wildlife around Campbell River introduces species you may encounter on the same coast. DFO marine mammal viewing guidance
Your notes can be specific even when you cannot identify the prey. “Whale surfaced three times in the same shallow reach, with a fresh cloud beside it on the second and third surfacings” gives someone a sequence to interpret. If the whale’s back was clear enough to show a low hump and knuckles, keep that species evidence separate from the feeding evidence. The combination of where it surfaced, what it looked like and what the water did tells more about the encounter than a label alone.
